01
Circuit design & PCB layout
Schematic capture through to fabrication and assembly files.
KiCadAltium
2–8 layerDFMGerber / BOM
Embedded hardware · Firmware · Industrial control
We design the board, write the firmware, and make the machine run.
An engineering studio in Jakarta working on embedded hardware and industrial control.
01
Design to production files
02
Hardware and firmware in one place
03
Reply within two working days
01 — Capabilities
What we build.
Six areas we work in.
02
Embedded firmware
Bare-metal and RTOS firmware.
STM32ESP32RP2040
nRF52FreeRTOSZephyr
03
Sensor & instrumentation
Turning a noisy physical signal into a number you can trust.
StrainRTDThermocouple
Load cell4–20 mA
04
Industrial control & retrofit
Modernising control on machines you already own.
Modbus RTU/TCPCANRS-485
PLCHMIVFD
05
Connectivity & telemetry
Moving data off the machine and somewhere useful.
BLELoRaWANWi-Fi
MQTTEthernet
06
Operational software
The systems around the hardware.
Node.jsExpress
MySQLREST
02 — Projects
Recent engagements.
Three examples of the problems we take on.
Industrial equipment
Control retrofit for a legacy production machine
Problem
Obsolete controller, no spares available.
Delivered
New control board and rewritten logic.
STM32RS-485
VFD7" HMI
Instrumentation
Multi-channel data logger with wireless telemetry
Problem
Field readings recorded by hand.
Delivered
Battery-powered logger with wireless upload.
24-bit ADCLoRa
Li-ionMQTT
Product development
Connected device, prototype to production files
Problem
Prototype not ready for volume manufacture.
Delivered
Production PCB, OTA firmware, full manufacturing package.
ESP32-S3BLE + Wi-Fi
OTADFM
03 — Engagements
How to start.
Fixed-scope pieces you can commission directly.
Design review
We go through your schematic, layout, or firmware.
$150/ session
Feasibility study
A written assessment of whether your concept can be built.
$450/ study
PCB design
Schematic and layout for a defined board.
from$900/ board
Firmware module
One defined block, bench-tested and documented.
from$800/ module
Full product development
Hardware and firmware from concept to production files.
Scoped quote
04 — Approach
How the work runs.
One engineer across hardware and firmware
The person who designs the board writes the firmware.
Documentation is part of the handover
Schematics, wiring diagrams, commented source.
Tested on real hardware
Validated on the actual board under realistic conditions.
Clear scope from the start
We tell you where the technical risk is before work begins.
05 — Studio
Who you are working with.
Karuniaji
Founder · Engineer
Projekt16 is run by its founding engineer.
The studio works between Jakarta and Japan.
06 — Blog
From the workbench.
Notes on problems we ran into and how they were solved.
07 — Contact
Send the technical details.
Tell us what you are building and where you are stuck.
Or email us directly
info@projekt16.net
Received.
Your message is in and a confirmation is on its way.